بازگشت به جستجو

Bowl fragment

عنوان	Bowl fragment
نویسنده	Unknown
تاریخ انتشار:	1250
محل انتشار	MÃ¡laga (made) -
موضوع	Ceramics
نوع	دیگر
زبان	نامشخص
دیجیتال	بله
نسخه خطی	خیر
ابعاد فیزیکی	Width: 21.50cm, Height: 19cm, Depth: 1.2cm
کتابخانه:	Victoria and Albert Museum
شناسه دارایی کتابخانه	1186-1897
شماره ثبت	1186-1897
محل کتابخانه	Middle East Section
تاریخ	1250
یادداشت‌ها	Fragment of a bowl, made in MÃ¡laga, Spain, 1250-1350, tin-glazed earthenware with lustre decoration
Malzemeler ve teknikler	Tin-glazed earthenware painted with a monochrome silver/copper lustre Tin-Glazed Earthenware Lustre-Painted
Fiziksel açıklama	Rim fragment from a small conical bowl, probably originally with a shallow profile. It is glazed on the exterior with a lead glaze and on the interior with an opaque tin-glaze. It is painted with a monochrome silver/copper lustre on the interior only. Its decoration consists of a geometric interlace pattern at the centre, surrounded by a wide frieze of vegetal scrolls border below the vertical rim. Technical Description The original diameter of this bowl can be extrapolated at 23 cm. It probably came down to quite a small base (of roughly the same size as C.1606-1927 ie approx 7 cm), since the thickness of the body starts to narrow as it approaches the foot. It was therefore not very big bowl originally and probably had quite a shallow profile. The clay is very fine and well-levigated. It is very red in colour. The tin-glaze is thick and white, indicating that a large amount of tin oxide has been used in the glaze mixture. The application of the lustre decoration suggests it has been painted on with a brush. It is a good quality lustre . There is a tripod scar at the bottom pointed corner which also has a bit of glaze stuck to it from the bowl which would have originally been stacked inside this bowl during the firing. It is very smooth on the back indicating that it has been turned with a tool. Long dragging areas in the concentric marks on the back indicate where a bit of clay has been caught in the tool as it was turning, probably on a wheel. There is no decoration on the exterior, which seems to have been glazed with a less expensive lead glaze.

مشاهده در منبع Victoria and Albert Museum Victoria and Albert Museum - موتور جستجوی نسخه های خطی عثمانی

Victoria and Albert Museum

Bowl fragment

نویسنده Unknown

تاریخ انتشار 1250

محل انتشار MÃ¡laga (made) -

موضوع Ceramics

نوع دیگر

زبان نامشخص

دیجیتال بله

نسخه خطی خیر

ابعاد فیزیکی Width: 21.50cm, Height: 19cm, Depth: 1.2cm

کتابخانه Victoria and Albert Museum

شناسه دارایی کتابخانه 1186-1897

شماره ثبت 1186-1897

محل کتابخانه Middle East Section

تاریخ 1250

یادداشت‌ها Fragment of a bowl, made in MÃ¡laga, Spain, 1250-1350, tin-glazed earthenware with lustre decoration

Malzemeler ve teknikler Tin-glazed earthenware painted with a monochrome silver/copper lustre Tin-Glazed Earthenware Lustre-Painted

Fiziksel açıklama Rim fragment from a small conical bowl, probably originally with a shallow profile. It is glazed on the exterior with a lead glaze and on the interior with an opaque tin-glaze. It is painted with a monochrome silver/copper lustre on the interior only. Its decoration consists of a geometric interlace pattern at the centre, surrounded by a wide frieze of vegetal scrolls border below the vertical rim. Technical Description The original diameter of this bowl can be extrapolated at 23 cm. It probably came down to quite a small base (of roughly the same size as C.1606-1927 ie approx 7 cm), since the thickness of the body starts to narrow as it approaches the foot. It was therefore not very big bowl originally and probably had quite a shallow profile. The clay is very fine and well-levigated. It is very red in colour. The tin-glaze is thick and white, indicating that a large amount of tin oxide has been used in the glaze mixture. The application of the lustre decoration suggests it has been painted on with a brush. It is a good quality lustre . There is a tripod scar at the bottom pointed corner which also has a bit of glaze stuck to it from the bowl which would have originally been stacked inside this bowl during the firing. It is very smooth on the back indicating that it has been turned with a tool. Long dragging areas in the concentric marks on the back indicate where a bit of clay has been caught in the tool as it was turning, probably on a wheel. There is no decoration on the exterior, which seems to have been glazed with a less expensive lead glaze.