Mass flow rate control of solenoid-based injectors

Name: Mass flow rate control of solenoid-based injectors
Author: Qureshi, Muhammad Sarmad, Kara, Ahmet Burhan, Ertunç, Özgür, Bebek, Özkan

İsim	Mass flow rate control of solenoid-based injectors
Yazar	Qureshi, Muhammad Sarmad, Kara, Ahmet Burhan, Ertunç, Özgür, Bebek, Özkan
Basım Tarihi:	2023-09
Basım Yeri	- Sage
Konu	Mass flow rate control, Open-loop, Super-twisting sliding mode control, High gain observer, Solenoid actuator, High gain observer, Mass flow rate control, Open-loop, Solenoid actuator, Super-twisting sliding mode control
Tür	Süreli Yayın
Dil	İspanyolca
Dijital	Evet
Yazma	Hayır
Kütüphane:	Özyeğin Üniversitesi
Demirbaş Numarası	2-s2.0-85162946058
Kayıt Numarası	c2999f07-ef3e-400c-8b69-37665feea203
Lokasyon	Mechanical Engineering
Tarih	2023-09
Örnek Metin	This paper presents a mass flow rate control method for solenoid-based injectors in open-loop, i.e. without physical sensor feedback. Measuring the mass flow rate in injectors is important because the performance of the injector determines fuel consumption and emissions. While it is possible to perform this control using different types of sensors, this would increase the cost and reduce the reliability. With this study, it was aimed to control the mass flow rate of solenoid-based injectors using continuous switching control to regulate the injector’s needle displacement without using sensors. For this purpose, a solenoid-actuated injector prototype was created. Model-based estimators were used to determine the states of the injector, while a super-twisting sliding mode controller was used to track the desired mass flow rate references. The results of the experiments showed that tracking for sinusoidal, triangular, and square trajectories yielded a mass flow rate percent error of less than 1.06. The proposed open-loop control algorithm can be used to track different mass flow rate references in internal combustion engines.
DOI	10.1177/14680874231178479
Cilt	24

Kaynağa git Özyeğin Üniversitesi

Aramaya Dön

Özyeğin Üniversitesi

Kaynağa git

Mass flow rate control of solenoid-based injectors

Yazar Qureshi, Muhammad Sarmad, Kara, Ahmet Burhan, Ertunç, Özgür, Bebek, Özkan

Basım Tarihi 2023-09

Basım Yeri - Sage

Konu Mass flow rate control, Open-loop, Super-twisting sliding mode control, High gain observer, Solenoid actuator, High gain observer, Mass flow rate control, Open-loop, Solenoid actuator, Super-twisting sliding mode control

Tür Süreli Yayın

Dil İspanyolca

Dijital Evet

Yazma Hayır

Kütüphane Özyeğin Üniversitesi

Demirbaş Numarası 2-s2.0-85162946058

Kayıt Numarası c2999f07-ef3e-400c-8b69-37665feea203

Lokasyon Mechanical Engineering

Tarih 2023-09

Örnek Metin This paper presents a mass flow rate control method for solenoid-based injectors in open-loop, i.e. without physical sensor feedback. Measuring the mass flow rate in injectors is important because the performance of the injector determines fuel consumption and emissions. While it is possible to perform this control using different types of sensors, this would increase the cost and reduce the reliability. With this study, it was aimed to control the mass flow rate of solenoid-based injectors using continuous switching control to regulate the injector’s needle displacement without using sensors. For this purpose, a solenoid-actuated injector prototype was created. Model-based estimators were used to determine the states of the injector, while a super-twisting sliding mode controller was used to track the desired mass flow rate references. The results of the experiments showed that tracking for sinusoidal, triangular, and square trajectories yielded a mass flow rate percent error of less than 1.06. The proposed open-loop control algorithm can be used to track different mass flow rate references in internal combustion engines.

DOI 10.1177/14680874231178479

Cilt 24