Author
Qureshi, Muhammad Sarmad, Kara, Ahmet Burhan, Ertunç, Özgür, Bebek, Özkan
Publication Date
2023-09
Publication Place
-
Sage
Subject
Mass flow rate control, Open-loop, Super-twisting sliding mode control, High gain observer, Solenoid actuator, High gain observer, Mass flow rate control, Open-loop, Solenoid actuator, Super-twisting sliding mode control
Type
Periodical
Language
Spanish
Digital
Yes
Manuscript
No
Library
Özyeğin University
Library Asset ID
2-s2.0-85162946058
Record ID
c2999f07-ef3e-400c-8b69-37665feea203
Library Location
Mechanical Engineering
Date
2023-09
Sample Text
This paper presents a mass flow rate control method for solenoid-based injectors in open-loop, i.e. without physical
sensor feedback. Measuring the mass flow rate in injectors is important because the performance of the injector
determines fuel consumption and emissions. While it is possible to perform this control using different types of sensors,
this would increase the cost and reduce the reliability. With this study, it was aimed to control the mass flow rate
of solenoid-based injectors using continuous switching control to regulate the injector’s needle displacement without
using sensors. For this purpose, a solenoid-actuated injector prototype was created. Model-based estimators were
used to determine the states of the injector, while a super-twisting sliding mode controller was used to track the desired
mass flow rate references. The results of the experiments showed that tracking for sinusoidal, triangular, and square
trajectories yielded a mass flow rate percent error of less than 1.06. The proposed open-loop control algorithm can be
used to track different mass flow rate references in internal combustion engines.
DOI
10.1177/14680874231178479
Cilt
24
