بازگشت به جستجو

Sandal

عنوان	Sandal
نویسنده	Unknown
تاریخ انتشار:	300
محل انتشار	Egypt (made) Akhmim (made) -
موضوع	Africa Archaeology Death Footwear
نوع	دیگر
زبان	نامشخص
دیجیتال	بله
نسخه خطی	خیر
ابعاد فیزیکی	Length: 250mm, Waist width: 35mm, Seat width: 55mm, Sole thickness: 7mm
کتابخانه:	Victoria and Albert Museum
شناسه دارایی کتابخانه	871-1903
شماره ثبت	871-1903
محل کتابخانه	Middle East Section
تاریخ	300
یادداشت‌ها	Partial fibre sandal, Egyptian, ca. 30BC-AD300 (probably). Decorated with red diagonal stripes and binding. Acquired from D.B. Myers. Coptic footwear was primarily made with leather, often using the turned technique, to produce a slipper or shoe with a straight sole. Slippers often included a rand at the vamp and a fibre padded sole sewn together with prominent stitching or insole tab. They show variation in the form and height of the instep. Shoes were generally slip-ons and also show variation in the form and height of the instep. Footwear was highly decorated in geometric and floral designs. Often a variety of techniques were used in combination, with the most popular being dyeing, gilding, openwork and appliquÃ©.
Malzemeler ve teknikler	Woven papyrus and halfa grass (?) Papyrus Weaving Dyeing Plaiting
Fiziksel açıklama	A partial, flat, fibre sewn sandal. Pointed toe and round heel. Medial tread missing. Holes (8mm diameter) present where back straps were attached at seat. Reinforced sole: The treadsole is protected from the ground with two stripes of plaited papyrus. One follows sandal perimeter and the other runs down the centre and ends at seat with exposed fibres. Outer plait is 1cm wide and only remains on lateral side. Only the waist section of the middle plait remains. Treadsole: Straight, possible Left. A layer of papyrus strips running horizontally. Darker, natural colour than the insole. Midsole: Layer of papyrus that lies vertically along the length of the sandal. The insole stripes lie diagonally over this layer. Insole: Composed of diagonal stripes of dyes red and natural papyrus (?). Stripe widths between 13mm and 15mm remain. Perimeter cores of halfa grass (?) at right angle to sole. Outer core is 15mm wide and red fibre is wrapped around long cores. The red stripes are wrapped into all three soles to tie the layers. The inner core is a thin (2mm diameter) stripe of halfa grass (?). Bound with red fibre.
Üslup	Coptic Egypt, Roman Period

مشاهده در منبع Victoria and Albert Museum Victoria and Albert Museum - موتور جستجوی نسخه های خطی عثمانی

Victoria and Albert Museum

Sandal

نویسنده Unknown

تاریخ انتشار 300

محل انتشار Egypt (made) Akhmim (made) -

موضوع Africa Archaeology Death Footwear

نوع دیگر

زبان نامشخص

دیجیتال بله

نسخه خطی خیر

ابعاد فیزیکی Length: 250mm, Waist width: 35mm, Seat width: 55mm, Sole thickness: 7mm

کتابخانه Victoria and Albert Museum

شناسه دارایی کتابخانه 871-1903

شماره ثبت 871-1903

محل کتابخانه Middle East Section

تاریخ 300

یادداشت‌ها Partial fibre sandal, Egyptian, ca. 30BC-AD300 (probably). Decorated with red diagonal stripes and binding. Acquired from D.B. Myers. Coptic footwear was primarily made with leather, often using the turned technique, to produce a slipper or shoe with a straight sole. Slippers often included a rand at the vamp and a fibre padded sole sewn together with prominent stitching or insole tab. They show variation in the form and height of the instep. Shoes were generally slip-ons and also show variation in the form and height of the instep. Footwear was highly decorated in geometric and floral designs. Often a variety of techniques were used in combination, with the most popular being dyeing, gilding, openwork and appliquÃ©.

Malzemeler ve teknikler Woven papyrus and halfa grass (?) Papyrus Weaving Dyeing Plaiting

Fiziksel açıklama A partial, flat, fibre sewn sandal. Pointed toe and round heel. Medial tread missing. Holes (8mm diameter) present where back straps were attached at seat. Reinforced sole: The treadsole is protected from the ground with two stripes of plaited papyrus. One follows sandal perimeter and the other runs down the centre and ends at seat with exposed fibres. Outer plait is 1cm wide and only remains on lateral side. Only the waist section of the middle plait remains. Treadsole: Straight, possible Left. A layer of papyrus strips running horizontally. Darker, natural colour than the insole. Midsole: Layer of papyrus that lies vertically along the length of the sandal. The insole stripes lie diagonally over this layer. Insole: Composed of diagonal stripes of dyes red and natural papyrus (?). Stripe widths between 13mm and 15mm remain. Perimeter cores of halfa grass (?) at right angle to sole. Outer core is 15mm wide and red fibre is wrapped around long cores. The red stripes are wrapped into all three soles to tie the layers. The inner core is a thin (2mm diameter) stripe of halfa grass (?). Bound with red fibre.

Üslup Coptic Egypt, Roman Period