العودة إلى البحث

Shoe

العنوان	Shoe
المؤلف	Unknown
تاريخ النشر:	300
مكان النشر	Egypt (made) Akhmim (made) -
الموضوع	Africa
النوع	أخرى
اللغة	غير محدد
رقمي	نعم
مخطوط	لا
الأبعاد الفيزيائية	Length: 240mm, Tread width: 60mm, Waist width: 50mm, Seat width: 55mm, Heel height: 80mm, Heel thickness: 2mm, Sole at heel thickness: 5mm
المكتبة:	Victoria and Albert Museum
معرف أصل المكتبة	869-1903
رقم السجل	869-1903
موقع المكتبة	Middle East Section
التاريخ	300
ملاحظات	A red leather shoe, Egyptian, ca. AD300-500 (possibly).
Malzemeler ve teknikler	Tanned and dyed leather with gilding and incising. Leather Gold Leaf Tanning Dyeing Gilding Incising
Fiziksel açıklama	A flat, red leather shoe. Egyptian, ca. AD300-500 (possibly). Pointed toe and round heel. Turned technique. Sole: Straight. Blackened with unknown substance over most of sole. Two cracks through sole at waist and seat. Worn at toe and indented at seat. Rand inserted at heel. Upper: White residue over instep, quarters and inside. Elaborately decorated. Small circular medallion mid-vamp of black stained circle with an eight pointed, linear star inside. Surrounded by 12 rectangles pointing our from circleâs edge. Vamp then decorated with two horizontal lines of gold over black stained background; then a row of three gold squares, each separated and ended by three gold lines; then two horizontal incised lines on black stained background; a row of gold diamonds; four incised horizontal lines (on the left side the shoemaker has over cut the lines); about 14 lines run vertically to the end of the vamp over instep (some black stain remains on background). The outer vertical line on either side is cut up to meet the first incised horizontal line (above the diamond row) to form a boxed section of incised decoration. One vertical incised line either side of the backseam. The vamp sits like a slipper with the quarters made from four separate pieces of leather. They are sewn at the backseam and once again in the middle of each quarter. Not sewn to vamp. Incised lines run vertically either side of each seam and a horizontal incised line runs around the quarters (2cm from top edge). Quartersâ top are cut, not sewn. On right side is a 0.6cm wide strip of leather threaded through the quarter at waist position. It extends out each side of two holes. The holes are present on the left side but the leather strip is missing. This may have tied the shoe across the foot.

عرض في المصدر Victoria and Albert Museum Victoria and Albert Museum - محرك بحث المخطوطات العثمانية

Victoria and Albert Museum

Shoe

المؤلف Unknown

تاريخ النشر 300

مكان النشر Egypt (made) Akhmim (made) -

الموضوع Africa

النوع أخرى

اللغة غير محدد

رقمي نعم

مخطوط لا

الأبعاد الفيزيائية Length: 240mm, Tread width: 60mm, Waist width: 50mm, Seat width: 55mm, Heel height: 80mm, Heel thickness: 2mm, Sole at heel thickness: 5mm

المكتبة Victoria and Albert Museum

معرف أصل المكتبة 869-1903

رقم السجل 869-1903

موقع المكتبة Middle East Section

التاريخ 300

ملاحظات A red leather shoe, Egyptian, ca. AD300-500 (possibly).

Malzemeler ve teknikler Tanned and dyed leather with gilding and incising. Leather Gold Leaf Tanning Dyeing Gilding Incising

Fiziksel açıklama A flat, red leather shoe. Egyptian, ca. AD300-500 (possibly). Pointed toe and round heel. Turned technique. Sole: Straight. Blackened with unknown substance over most of sole. Two cracks through sole at waist and seat. Worn at toe and indented at seat. Rand inserted at heel. Upper: White residue over instep, quarters and inside. Elaborately decorated. Small circular medallion mid-vamp of black stained circle with an eight pointed, linear star inside. Surrounded by 12 rectangles pointing our from circleâs edge. Vamp then decorated with two horizontal lines of gold over black stained background; then a row of three gold squares, each separated and ended by three gold lines; then two horizontal incised lines on black stained background; a row of gold diamonds; four incised horizontal lines (on the left side the shoemaker has over cut the lines); about 14 lines run vertically to the end of the vamp over instep (some black stain remains on background). The outer vertical line on either side is cut up to meet the first incised horizontal line (above the diamond row) to form a boxed section of incised decoration. One vertical incised line either side of the backseam. The vamp sits like a slipper with the quarters made from four separate pieces of leather. They are sewn at the backseam and once again in the middle of each quarter. Not sewn to vamp. Incised lines run vertically either side of each seam and a horizontal incised line runs around the quarters (2cm from top edge). Quartersâ top are cut, not sewn. On right side is a 0.6cm wide strip of leather threaded through the quarter at waist position. It extends out each side of two holes. The holes are present on the left side but the leather strip is missing. This may have tied the shoe across the foot.