العودة إلى البحث

Shoe

العنوان	Shoe
المؤلف	Unknown
تاريخ النشر:	300
مكان النشر	Egypt (made) Antinoe (made) -
الموضوع	Africa Archaeology Death Footwear
النوع	أخرى
اللغة	غير محدد
رقمي	نعم
مخطوط	لا
الأبعاد الفيزيائية	Length: 170mm, Tread width: 65mm, Waist width: 55mm, Seat width: 50mm, Heel height: 50mm, Heel thickness: 2mm, Sole thickness: 3mm
المكتبة:	Victoria and Albert Museum
معرف أصل المكتبة	T.159-1914
رقم السجل	T.159-1914
موقع المكتبة	Middle East Section
التاريخ	300
ملاحظات	A dark leather shoe, Egyptian, ca. AD300-700 (probably). Decorated with a scraped design. Acquired from the Egypt Exploration Fund. Coptic footwear was primarily made with leather, often using the turned technique, to produce a slipper or shoe with a straight sole. Slippers often included a rand at the vamp and a fibre padded sole sewn together with prominent stitching or insole tab. They show variation in the form and height of the instep. Shoes were generally slip-ons and also show variation in the form and height of the instep. Footwear was highly decorated in geometric and floral designs. Often a variety of techniques were used in combination, with the most popular being dyeing, gilding, openwork and appliquÃ©.
Malzemeler ve teknikler	Tanned leather with scraping Leather Tanning Scraping
Fiziksel açıklama	A dark, leather child's shoe. Round toe and round heel. Turned technique. Sole: Straight but wear suggests Left. Hole at seat. Cracking at waist. Deep cracks at big toe. Well worn. Wide running stitches along perimeter of sole. Was the shoe mended? These are roughly done and there are smaller, neater stitch holes around sole perimeter which at some places still hold. These smaller ones are the turned stitches. No insole. Upper: Once piece with backseam turned in and sewn with running stitch. No topband. Forepart of vamp well creased. Mid-vamp to instep decorated with scraped design. Mid-vamp there is one horizontal line; then a band of cross-hatching (14mm wide); then a band of thick, rounded Vs on their sides, separated by think lines; finished with another horizontal line. Vamp ends in high throat with a point over instep and a circular knop at the point. Quarters come up hight to ankle.
Üslup	Coptic

عرض في المصدر Victoria and Albert Museum Victoria and Albert Museum - محرك بحث المخطوطات العثمانية

Victoria and Albert Museum

Shoe

المؤلف Unknown

تاريخ النشر 300

مكان النشر Egypt (made) Antinoe (made) -

الموضوع Africa Archaeology Death Footwear

النوع أخرى

اللغة غير محدد

رقمي نعم

مخطوط لا

الأبعاد الفيزيائية Length: 170mm, Tread width: 65mm, Waist width: 55mm, Seat width: 50mm, Heel height: 50mm, Heel thickness: 2mm, Sole thickness: 3mm

المكتبة Victoria and Albert Museum

معرف أصل المكتبة T.159-1914

رقم السجل T.159-1914

موقع المكتبة Middle East Section

التاريخ 300

ملاحظات A dark leather shoe, Egyptian, ca. AD300-700 (probably). Decorated with a scraped design. Acquired from the Egypt Exploration Fund. Coptic footwear was primarily made with leather, often using the turned technique, to produce a slipper or shoe with a straight sole. Slippers often included a rand at the vamp and a fibre padded sole sewn together with prominent stitching or insole tab. They show variation in the form and height of the instep. Shoes were generally slip-ons and also show variation in the form and height of the instep. Footwear was highly decorated in geometric and floral designs. Often a variety of techniques were used in combination, with the most popular being dyeing, gilding, openwork and appliquÃ©.

Malzemeler ve teknikler Tanned leather with scraping Leather Tanning Scraping

Fiziksel açıklama A dark, leather child's shoe. Round toe and round heel. Turned technique. Sole: Straight but wear suggests Left. Hole at seat. Cracking at waist. Deep cracks at big toe. Well worn. Wide running stitches along perimeter of sole. Was the shoe mended? These are roughly done and there are smaller, neater stitch holes around sole perimeter which at some places still hold. These smaller ones are the turned stitches. No insole. Upper: Once piece with backseam turned in and sewn with running stitch. No topband. Forepart of vamp well creased. Mid-vamp to instep decorated with scraped design. Mid-vamp there is one horizontal line; then a band of cross-hatching (14mm wide); then a band of thick, rounded Vs on their sides, separated by think lines; finished with another horizontal line. Vamp ends in high throat with a point over instep and a circular knop at the point. Quarters come up hight to ankle.

Üslup Coptic