Cushion cover

العنوان Cushion cover
المؤلف Unknown
تاريخ النشر: 1700
مكان النشر Turkey (made) -
الموضوع Textiles
النوع أخرى
اللغة غير محدد
رقمي نعم
مخطوط لا
الأبعاد الفيزيائية Length: 92.5cm, Width: 69cm, Length: 32.5cm (of pattern repeat), Width: 20cm (of pattern repeat)
المكتبة: Victoria and Albert Museum
معرف أصل المكتبة 854-1897
رقم السجل 854-1897
موقع المكتبة Middle East Section
التاريخ 1700
ملاحظات velvet, 1700-1729, Turkish
Malzemeler ve teknikler woven silk brocade cushion cover. Satin Foundation structure 4/1 satin, warp count not taken; silk; ivory; 1 ply. Weft: cotton, 2 ply. Satin and velved warp order 3-1-2. Velvet structure, red and green. Pile counts, warps 12; along weft 13. Binding weft threads: fabric backed. Brocade structure: wholly brocaded? whole, 4/1 twill, count 20. Shots between pile 2. Metal and twist: silver and gilt. Z tightness of wrap: Super. Alternate as follows: gold main field; plain silk spandrels; gold border; silver lappets. Metal totally blackened; two colours of silk: ivory and bronze; metal thinner in diameter than some. Selvedges: dimensions cut. General notes: It seems possible that this textile has a hiccup or flaw in the main field or similar. Note particularly that the blossom in the centre of the main border at the upper end and compare it to others of the type; it is scrunched, the middle portion is missing. However, the lappets are fine - no squashing or missing bits. It is possible the thread model was too large for the loom. The man who tied the two separate patterns - lappets and main field - to the loom first did the lappets. As he began tying the second thread model to the lashes/cords that connect it to the pile warps (ie. attaching the pattern harness to the loom), he realised that there were too many warps in the pattern and not enough on the loom. This comes from a practice of combining and recombining patterns. Note esp. here that the borders were of the same proportion as the main field, as they are clumsily reduced too. Silk (Textile) Metal Weaving
Fiziksel açıklama Red and green silk velvet brocade with vertical and horizontal point repeat with 4 minimum pattern areas.
Üslup Ottoman
عرض في المصدر Victoria and Albert Museum Victoria and Albert Museum - محرك بحث المخطوطات العثمانية
Victoria and Albert Museum - محرك بحث المخطوطات العثمانية Victoria and Albert Museum

Cushion cover

المؤلف Unknown
تاريخ النشر 1700
مكان النشر Turkey (made) -
الموضوع Textiles
النوع أخرى
اللغة غير محدد
رقمي نعم
مخطوط لا
الأبعاد الفيزيائية Length: 92.5cm, Width: 69cm, Length: 32.5cm (of pattern repeat), Width: 20cm (of pattern repeat)
المكتبة Victoria and Albert Museum
معرف أصل المكتبة 854-1897
رقم السجل 854-1897
موقع المكتبة Middle East Section
التاريخ 1700
ملاحظات velvet, 1700-1729, Turkish
Malzemeler ve teknikler woven silk brocade cushion cover. Satin Foundation structure 4/1 satin, warp count not taken; silk; ivory; 1 ply. Weft: cotton, 2 ply. Satin and velved warp order 3-1-2. Velvet structure, red and green. Pile counts, warps 12; along weft 13. Binding weft threads: fabric backed. Brocade structure: wholly brocaded? whole, 4/1 twill, count 20. Shots between pile 2. Metal and twist: silver and gilt. Z tightness of wrap: Super. Alternate as follows: gold main field; plain silk spandrels; gold border; silver lappets. Metal totally blackened; two colours of silk: ivory and bronze; metal thinner in diameter than some. Selvedges: dimensions cut. General notes: It seems possible that this textile has a hiccup or flaw in the main field or similar. Note particularly that the blossom in the centre of the main border at the upper end and compare it to others of the type; it is scrunched, the middle portion is missing. However, the lappets are fine - no squashing or missing bits. It is possible the thread model was too large for the loom. The man who tied the two separate patterns - lappets and main field - to the loom first did the lappets. As he began tying the second thread model to the lashes/cords that connect it to the pile warps (ie. attaching the pattern harness to the loom), he realised that there were too many warps in the pattern and not enough on the loom. This comes from a practice of combining and recombining patterns. Note esp. here that the borders were of the same proportion as the main field, as they are clumsily reduced too. Silk (Textile) Metal Weaving
Fiziksel açıklama Red and green silk velvet brocade with vertical and horizontal point repeat with 4 minimum pattern areas.
Üslup Ottoman
Victoria and Albert Museum - محرك بحث المخطوطات العثمانية
Victoria and Albert Museum يتم إعادة توجيهك...

يرجى الانتظار