العودة إلى البحث

Fibula

العنوان	Fibula
المؤلف	Unknown
تاريخ النشر:	1850
مكان النشر	Algeria (made) AurÃ¨s (worn) -
الموضوع	Jewellery Africa Metalwork
النوع	أخرى
اللغة	غير محدد
رقمي	نعم
مخطوط	لا
الأبعاد الفيزيائية	Width: 4cm, Length: 8.4cm
المكتبة:	Victoria and Albert Museum
معرف أصل المكتبة	333-1904
رقم السجل	333-1904
موقع المكتبة	Middle East Section
التاريخ	1850
ملاحظات	The traditional jewellery of the Berber tribes of North Africa is almost always made of silver in heavy, clearly-defined shapes. Although individual pieces rarely date back any earlier than the 19th century, the designs are very old, and European observers liked to find traces of Roman or Phoenician influence. The use of ring brooches to fasten womenâs traditional clothing is universal across the region and dates back to late Roman times. Most of these brooches are penannular in shape, like this one, with all the decoration lavished on the head of the pin. They were worn in pairs, usually linked together by a long chain threaded through the hole at the top of the pin, to hold the dress together, and were worn upside down, with the pin and the plain ring at the top, and the decorative head hanging down. The design of this pin identifies it as coming from the AurÃ¨s region of Algeria. The jewellery of AurÃ¨s is much more austere than the better-known enamelled coral jewellery of the Kabyle region.
Malzemeler ve teknikler	silver, incising, punching Silver Punching Incising
Fiziksel açıklama	Small cast silver fibula pin with penannular guard ring. The pin has a flat circular openwork head with sprays protruding on three sides and the pin attached at the fourth. The spray at the top has a hole in it. The guard ring has flattened terminals and is attached through a hole at the top of the pin.

عرض في المصدر Victoria and Albert Museum Victoria and Albert Museum - محرك بحث المخطوطات العثمانية

Victoria and Albert Museum

Fibula

المؤلف Unknown

تاريخ النشر 1850

مكان النشر Algeria (made) AurÃ¨s (worn) -

الموضوع Jewellery Africa Metalwork

النوع أخرى

اللغة غير محدد

رقمي نعم

مخطوط لا

الأبعاد الفيزيائية Width: 4cm, Length: 8.4cm

المكتبة Victoria and Albert Museum

معرف أصل المكتبة 333-1904

رقم السجل 333-1904

موقع المكتبة Middle East Section

التاريخ 1850

ملاحظات The traditional jewellery of the Berber tribes of North Africa is almost always made of silver in heavy, clearly-defined shapes. Although individual pieces rarely date back any earlier than the 19th century, the designs are very old, and European observers liked to find traces of Roman or Phoenician influence. The use of ring brooches to fasten womenâs traditional clothing is universal across the region and dates back to late Roman times. Most of these brooches are penannular in shape, like this one, with all the decoration lavished on the head of the pin. They were worn in pairs, usually linked together by a long chain threaded through the hole at the top of the pin, to hold the dress together, and were worn upside down, with the pin and the plain ring at the top, and the decorative head hanging down. The design of this pin identifies it as coming from the AurÃ¨s region of Algeria. The jewellery of AurÃ¨s is much more austere than the better-known enamelled coral jewellery of the Kabyle region.

Malzemeler ve teknikler silver, incising, punching Silver Punching Incising

Fiziksel açıklama Small cast silver fibula pin with penannular guard ring. The pin has a flat circular openwork head with sprays protruding on three sides and the pin attached at the fourth. The spray at the top has a hole in it. The guard ring has flattened terminals and is attached through a hole at the top of the pin.