Experimental and numerical study of rubber flow in the extrusion die of a weather strip

Name: Experimental and numerical study of rubber flow in the extrusion die of a weather strip
Author: Talib, Nayyef Ahmed, Ertunç, Özgür, Türkistanli, T., Aydın, E.

İsim	Experimental and numerical study of rubber flow in the extrusion die of a weather strip
Yazar	Talib, Nayyef Ahmed, Ertunç, Özgür, Türkistanli, T., Aydın, E.
Basım Tarihi:	2019
Basım Yeri	- Society of Chemical Engineers
Konu	Finite element simulation, Rubber extrusion, Thermal flow, Viscous dissipation, Weather strip
Tür	Süreli Yayın
Dil	İngilizce
Dijital	Evet
Yazma	Hayır
Kütüphane:	Özyeğin Üniversitesi
Demirbaş Numarası	0021-9592
Kayıt Numarası	a4ada331-17bc-44a2-8427-3db78ebcb096
Lokasyon	Mechanical Engineering
Tarih	2019
Notlar	Ozyegin University ; University of Diyala
Örnek Metin	Extrusion is the main method used to produce rubber weather strips in automotive industries, and the quality of the final product largely depends on the thermal properties of the process output. Therefore, precise thermal control of the process is the key to product quality control. This study establishes a three-dimensional model of the nonisothermal viscous flow of ethylene propylene diene monomer (EPDM) rubber melts through a power law rheological model and a mixed finite element method. The rheological properties of the filled rubber compound were characterized using a capillary rheometer (Rosand) at different temperatures to evaluate the required material parameters for numerical simulation. Curing characteristics were investigated using a rubber process analyzer (RPA-2000) to construct a curing curve at different temperatures. The pressure-stabilized Petrov-Galerkin (PSPG) method and streamline upwind/ Petrov-Galerkin numerical scheme were employed to solve the flow equations and increase numerical stability. The power law rheological model was combined with field equations such as continuity, momentum, and energy equations to determine the complex flow behavior in an extrusion die of real geometry. Extrusion experiments were performed in an industrial extrusion line, and temperature and pressure were measured at different extruder speeds by using special sensors mounted on the extrusion die. The results confirmed that for EPDM rubber compound, the extruder speed exerted a remarkable effect on the temperature rise and pressure drop in the extrusion die. The impact of viscous dissipation on the thermal behavior and pressure drop prediction of the rubber compound flow is also discussed. The obtained scorch time was compared with the estimated residence time in the flow domain to elucidate the influence of extruder speed on the processing characteristic. The results suggested the lack of premature vulcanization or the start of scorching inside the flow domain within the studied extruder speed range. The validity of model prediction was verified by comparison between simulation and experimental results. The predicted results of the model showed good agreement with the experimental data.
DOI	10.1252/jcej.18we282
Cilt	52

Kaynağa git Özyeğin Üniversitesi

Aramaya Dön

Özyeğin Üniversitesi

Kaynağa git

Experimental and numerical study of rubber flow in the extrusion die of a weather strip

Yazar Talib, Nayyef Ahmed, Ertunç, Özgür, Türkistanli, T., Aydın, E.

Basım Tarihi 2019

Basım Yeri - Society of Chemical Engineers

Konu Finite element simulation, Rubber extrusion, Thermal flow, Viscous dissipation, Weather strip

Tür Süreli Yayın

Dil İngilizce

Dijital Evet

Yazma Hayır

Kütüphane Özyeğin Üniversitesi

Demirbaş Numarası 0021-9592

Kayıt Numarası a4ada331-17bc-44a2-8427-3db78ebcb096

Lokasyon Mechanical Engineering

Tarih 2019

Notlar Ozyegin University ; University of Diyala

Örnek Metin Extrusion is the main method used to produce rubber weather strips in automotive industries, and the quality of the final product largely depends on the thermal properties of the process output. Therefore, precise thermal control of the process is the key to product quality control. This study establishes a three-dimensional model of the nonisothermal viscous flow of ethylene propylene diene monomer (EPDM) rubber melts through a power law rheological model and a mixed finite element method. The rheological properties of the filled rubber compound were characterized using a capillary rheometer (Rosand) at different temperatures to evaluate the required material parameters for numerical simulation. Curing characteristics were investigated using a rubber process analyzer (RPA-2000) to construct a curing curve at different temperatures. The pressure-stabilized Petrov-Galerkin (PSPG) method and streamline upwind/ Petrov-Galerkin numerical scheme were employed to solve the flow equations and increase numerical stability. The power law rheological model was combined with field equations such as continuity, momentum, and energy equations to determine the complex flow behavior in an extrusion die of real geometry. Extrusion experiments were performed in an industrial extrusion line, and temperature and pressure were measured at different extruder speeds by using special sensors mounted on the extrusion die. The results confirmed that for EPDM rubber compound, the extruder speed exerted a remarkable effect on the temperature rise and pressure drop in the extrusion die. The impact of viscous dissipation on the thermal behavior and pressure drop prediction of the rubber compound flow is also discussed. The obtained scorch time was compared with the estimated residence time in the flow domain to elucidate the influence of extruder speed on the processing characteristic. The results suggested the lack of premature vulcanization or the start of scorching inside the flow domain within the studied extruder speed range. The validity of model prediction was verified by comparison between simulation and experimental results. The predicted results of the model showed good agreement with the experimental data.

DOI 10.1252/jcej.18we282

Cilt 52