Aramaya Dön

Holster

İsim	Holster
Yazar	Unknown Unknown (designed and made by)
Basım Tarihi:	1800
Basım Yeri	Iran (made) -
Konu	Textiles
Tür	Diğer
Dil	Belirlenmemiş dil
Dijital	Evet
Yazma	Hayır
Fiziksel Boyutlar	Length: 41.5cm, Including strap length: 51cm, Maximum width: 17cm, Minimum width: 7cm
Kütüphane:	Victoria and Albert Museum
Demirbaş Numarası	842A-1876
Kayıt Numarası	842A-1876
Lokasyon	Middle East Section
Tarih	1800
Notlar	embroidered leather, 1800-1850, Persian
Örnek Metin	Note in ink on the back, on the strap, some letters including 'poznj'
Malzemeler ve teknikler	silk thread, metal thread, cotton yarn, leather, weaving, embroidering, sewing.
Fiziksel açıklama	Holster for a pistol or revolver, leather and silk velvet embroidered with silk in straight stitches, couched metal thread and cotton in chain stitch. Basically this is an elongated triangle with slightly curving sides. The back is flat and is made from brown leather stamped with a pattern of pairs of vertical and diagonal lines forming a chevron design with circular indentations. At the bottom is an arch-shaped piece of green leather [into which a strap would have been inserted]. The lower edge is bound with a narrow strip of green leather. A fine line of alternating black and white cotton in chain stitch goes down the sides and over the point of the green arch. Towards the top of the back there is a larger downward pointing arch shape in green leather with the same black/white stitching. Inserted into this are the two ends of a brown leather strap forming a loop and stitched in place with cotton twine. These are further secured by horizontal pieces of brown and green leather which are stitched into 2 small horizontal arch-shaped pieces of green leather. The front is formed by a curved piece of leather joined down the sides to the back but open at the bottom. An arch-shaped flap of leather covers the upper half of the front. The flap and the uncovered part of the front are covered with dark blue velvet which must have been embroidered first and then glued [?] to the leather. The sides have been reinforced with a strip of leather and the edges of the flap are worked into a chevron pattern using green, red, white, mauve [faded], blue and yellow silk. The flap is embroidered with the seated figure of a man with a bird on his left hand. He is within an arch shape. There is a border on 3 sides [not across the top] with a meander with flowers and leaves. Red, dark red, green and a little yellow silk is used for details. The main embroidery is couched metal thread. The lower part of the front has a long, lobed cypress tree, stems and flowers. There are two embroidered green spots at the bottom. Silk: 2S Metal Thread: [1] silver strip open and close S-wound on white silk and couched over card shapes. [2] silver-gilt strip open and close S-wound on white silk and couched over card shapes.

Kaynağa git Victoria and Albert Museum Victoria and Albert Museum - Osmanlıca el yazması arama motoru

Victoria and Albert Museum

Holster

Yazar Unknown Unknown (designed and made by)

Basım Tarihi 1800

Basım Yeri Iran (made) -

Konu Textiles

Tür Diğer

Dil Belirlenmemiş dil

Dijital Evet

Yazma Hayır

Fiziksel Boyutlar Length: 41.5cm, Including strap length: 51cm, Maximum width: 17cm, Minimum width: 7cm

Kütüphane Victoria and Albert Museum

Demirbaş Numarası 842A-1876

Kayıt Numarası 842A-1876

Lokasyon Middle East Section

Tarih 1800

Notlar embroidered leather, 1800-1850, Persian

Örnek Metin Note in ink on the back, on the strap, some letters including 'poznj'

Malzemeler ve teknikler silk thread, metal thread, cotton yarn, leather, weaving, embroidering, sewing.

Fiziksel açıklama Holster for a pistol or revolver, leather and silk velvet embroidered with silk in straight stitches, couched metal thread and cotton in chain stitch. Basically this is an elongated triangle with slightly curving sides. The back is flat and is made from brown leather stamped with a pattern of pairs of vertical and diagonal lines forming a chevron design with circular indentations. At the bottom is an arch-shaped piece of green leather [into which a strap would have been inserted]. The lower edge is bound with a narrow strip of green leather. A fine line of alternating black and white cotton in chain stitch goes down the sides and over the point of the green arch. Towards the top of the back there is a larger downward pointing arch shape in green leather with the same black/white stitching. Inserted into this are the two ends of a brown leather strap forming a loop and stitched in place with cotton twine. These are further secured by horizontal pieces of brown and green leather which are stitched into 2 small horizontal arch-shaped pieces of green leather. The front is formed by a curved piece of leather joined down the sides to the back but open at the bottom. An arch-shaped flap of leather covers the upper half of the front. The flap and the uncovered part of the front are covered with dark blue velvet which must have been embroidered first and then glued [?] to the leather. The sides have been reinforced with a strip of leather and the edges of the flap are worked into a chevron pattern using green, red, white, mauve [faded], blue and yellow silk. The flap is embroidered with the seated figure of a man with a bird on his left hand. He is within an arch shape. There is a border on 3 sides [not across the top] with a meander with flowers and leaves. Red, dark red, green and a little yellow silk is used for details. The main embroidery is couched metal thread. The lower part of the front has a long, lobed cypress tree, stems and flowers. There are two embroidered green spots at the bottom. Silk: 2S Metal Thread: [1] silver strip open and close S-wound on white silk and couched over card shapes. [2] silver-gilt strip open and close S-wound on white silk and couched over card shapes.