بازگشت به جستجو

Holster

عنوان	Holster
نویسنده	Unknown Unknown (designed and made by)
تاریخ انتشار:	1800
محل انتشار	Iran (made) -
موضوع	Textiles
نوع	دیگر
زبان	نامشخص
دیجیتال	بله
نسخه خطی	خیر
ابعاد فیزیکی	Length: 41.5cm, Including strap length: 51cm, Maximum width: 17cm, Minimum width: 6.5cm
کتابخانه:	Victoria and Albert Museum
شناسه دارایی کتابخانه	842-1876
شماره ثبت	842-1876
محل کتابخانه	Middle East Section
تاریخ	1800
یادداشت‌ها	embroidered leather, 1800-1850, Persian
متن نمونه	Note in ink on the back, on the strap, some letters including 'poznj'.
Malzemeler ve teknikler	silk thread, metal thread, cotton yarn, leather, weaving, embroidering, sewing.
Fiziksel açıklama	Holster for a pistol or revolver, leather and silk velvet embroidered with silk in straight stitches, couched metal thread and cotton in chain stitch. Basically this is an elongated triangle with slightly curving sides. The back is flat and is made from brown leather stamped with a pattern of pairs of vertical and diagonal lines forming a chevron design with circular indentations. At the bottom is an arch-shaped piece of green leather [into which a strap would have been inserted]. The lower edge is bound with a narrow strip of green leather. A fine line of alternating black and white cotton in chain stitch goes down the sides and over the point of the green arch. Towards the top of the back there is a larger downward pointing arch shape in green leather with the same black/white stitching. Inserted into this are the two ends of a brown leather strap forming a loop and stitched in place with cotton twine. These are further secured by horizontal pieces of brown and green leather which are stitched into 2 small horizontal arch-shaped pieces of green leather. The front is formed by a curved piece of leather joined down the sides to the back but open at the bottom. An arch-shaped flap of leather covers the upper half of the front. The flap and the uncovered part of the front are covered with dark blue velvet which must have been embroidered first and then glued [?] to the leather. The sides have been reinforced with a strip of leather and the edges of the flap are worked into a chevron pattern using green, red, white, dark red and yellow silk. The flap is embroidered with the seated figure of a man with a bird on his left hand. He is within an arch shape. There is a border on 3 sides [not across the top] with a meander with flowers and leaves. Red, dark red, green and a little yellow silk is used for details. The main embroidery is couched metal thread. The lower part of the front has a long, lobed cypress tree, stems and flowers. Silk: 2S Metal Thread: silver strip open and close S-wound on white silk and couched over card shapes.

مشاهده در منبع Victoria and Albert Museum Victoria and Albert Museum - موتور جستجوی نسخه های خطی عثمانی

Victoria and Albert Museum

Holster

نویسنده Unknown Unknown (designed and made by)

تاریخ انتشار 1800

محل انتشار Iran (made) -

موضوع Textiles

نوع دیگر

زبان نامشخص

دیجیتال بله

نسخه خطی خیر

ابعاد فیزیکی Length: 41.5cm, Including strap length: 51cm, Maximum width: 17cm, Minimum width: 6.5cm

کتابخانه Victoria and Albert Museum

شناسه دارایی کتابخانه 842-1876

شماره ثبت 842-1876

محل کتابخانه Middle East Section

تاریخ 1800

یادداشت‌ها embroidered leather, 1800-1850, Persian

متن نمونه Note in ink on the back, on the strap, some letters including 'poznj'.

Malzemeler ve teknikler silk thread, metal thread, cotton yarn, leather, weaving, embroidering, sewing.

Fiziksel açıklama Holster for a pistol or revolver, leather and silk velvet embroidered with silk in straight stitches, couched metal thread and cotton in chain stitch. Basically this is an elongated triangle with slightly curving sides. The back is flat and is made from brown leather stamped with a pattern of pairs of vertical and diagonal lines forming a chevron design with circular indentations. At the bottom is an arch-shaped piece of green leather [into which a strap would have been inserted]. The lower edge is bound with a narrow strip of green leather. A fine line of alternating black and white cotton in chain stitch goes down the sides and over the point of the green arch. Towards the top of the back there is a larger downward pointing arch shape in green leather with the same black/white stitching. Inserted into this are the two ends of a brown leather strap forming a loop and stitched in place with cotton twine. These are further secured by horizontal pieces of brown and green leather which are stitched into 2 small horizontal arch-shaped pieces of green leather. The front is formed by a curved piece of leather joined down the sides to the back but open at the bottom. An arch-shaped flap of leather covers the upper half of the front. The flap and the uncovered part of the front are covered with dark blue velvet which must have been embroidered first and then glued [?] to the leather. The sides have been reinforced with a strip of leather and the edges of the flap are worked into a chevron pattern using green, red, white, dark red and yellow silk. The flap is embroidered with the seated figure of a man with a bird on his left hand. He is within an arch shape. There is a border on 3 sides [not across the top] with a meander with flowers and leaves. Red, dark red, green and a little yellow silk is used for details. The main embroidery is couched metal thread. The lower part of the front has a long, lobed cypress tree, stems and flowers. Silk: 2S Metal Thread: silver strip open and close S-wound on white silk and couched over card shapes.