Safety test setup installation for e-bike battery systems

Name: Safety test setup installation for e-bike battery systems
Author: Savrum, Mert, Poyrazoğlu, Göktürk

İsim	Safety test setup installation for e-bike battery systems
Yazar	Savrum, Mert, Poyrazoğlu, Göktürk
Basım Tarihi:	2022
Basım Yeri	- IEEE
Konu	Accredited laboratory, Battery, Battery management system, EN50604, IEC 62133-2, IEC62281(UN38.3), Lithium-ion
Tür	Belge
Dil	İngilizce
Dijital	Evet
Yazma	Hayır
Kütüphane:	Özyeğin Üniversitesi
Demirbaş Numarası	978-166546925-8
Kayıt Numarası	42c2dde3-8dc9-49e6-ac55-26c3159ec6f9
Lokasyon	Electrical & Electronics Engineering
Tarih	2022
Notlar	Vestel Electronics
Örnek Metin	Recently, battery project studies have been increasing worldwide. Companies carrying out these projects must have their products checked for design safety and must obtain test approval reports in order to release their products on the market. IEC 62133-2 test approvals are required for lithium-ion rechargeable batteries, and EN 50604 test approvals are necessary for rechargeable li-ion batteries used in Light EV (electric vehicles). In addition, UN38.3(IEC 62281) battery transport tests must be applied for the transport of these batteries. These tests should be performed in an accredited laboratory, the safety of the design should be verified in this way, and then an accredited report should be issued to the product. There was no accredited laboratory in Turkey that performed tests in accordance with these standards. For this reason, companies were receiving services from overseas laboratories for the cell and battery approvals that they designed. There could be time and financial problems in overseas laboratories approvals. Due to these problems, an accredited laboratory was established at Vestel Electronics in Turkey, where tests can be carried out in accordance with IEC62133-2, EN50604, and UN38.3 (IEC62281) standards. Since batteries contain BMS cards, their tests are also carried out in this laboratory. Within the scope of this accredited laboratory established in Turkey, it will be stated how the test setups that meet the test requirements are set up. Test results with these devices will be evaluated. The test results will belong to an E-bike battery project.
DOI	10.1109/GPECOM55404.2022.9815788

Kaynağa git Özyeğin Üniversitesi

Aramaya Dön

Özyeğin Üniversitesi

Kaynağa git

Safety test setup installation for e-bike battery systems

Yazar Savrum, Mert, Poyrazoğlu, Göktürk

Basım Tarihi 2022

Basım Yeri - IEEE

Konu Accredited laboratory, Battery, Battery management system, EN50604, IEC 62133-2, IEC62281(UN38.3), Lithium-ion

Tür Belge

Dil İngilizce

Dijital Evet

Yazma Hayır

Kütüphane Özyeğin Üniversitesi

Demirbaş Numarası 978-166546925-8

Kayıt Numarası 42c2dde3-8dc9-49e6-ac55-26c3159ec6f9

Lokasyon Electrical & Electronics Engineering

Tarih 2022

Notlar Vestel Electronics

Örnek Metin Recently, battery project studies have been increasing worldwide. Companies carrying out these projects must have their products checked for design safety and must obtain test approval reports in order to release their products on the market. IEC 62133-2 test approvals are required for lithium-ion rechargeable batteries, and EN 50604 test approvals are necessary for rechargeable li-ion batteries used in Light EV (electric vehicles). In addition, UN38.3(IEC 62281) battery transport tests must be applied for the transport of these batteries. These tests should be performed in an accredited laboratory, the safety of the design should be verified in this way, and then an accredited report should be issued to the product. There was no accredited laboratory in Turkey that performed tests in accordance with these standards. For this reason, companies were receiving services from overseas laboratories for the cell and battery approvals that they designed. There could be time and financial problems in overseas laboratories approvals. Due to these problems, an accredited laboratory was established at Vestel Electronics in Turkey, where tests can be carried out in accordance with IEC62133-2, EN50604, and UN38.3 (IEC62281) standards. Since batteries contain BMS cards, their tests are also carried out in this laboratory. Within the scope of this accredited laboratory established in Turkey, it will be stated how the test setups that meet the test requirements are set up. Test results with these devices will be evaluated. The test results will belong to an E-bike battery project.

DOI 10.1109/GPECOM55404.2022.9815788