Induction cooker design with quasi resonant topology using jitter drive method

Name: Induction cooker design with quasi resonant topology using jitter drive method
Author: Tulu, M. E., Yildirim, D.

İsim	Induction cooker design with quasi resonant topology using jitter drive method
Yazar	Tulu, M. E., Yildirim, D.
Basım Tarihi:	2013
Basım Yeri	- IEEE
Konu	Induction cooker, Ferromagnetic, Eddy current, Jitter method, Quasi resonant
Tür	Belge
Dil	İngilizce
Dijital	Evet
Yazma	Hayır
Kütüphane:	Özyeğin Üniversitesi
Kayıt Numarası	507e2fdc-38af-4073-bad0-4bb0a0e5f7cb
Tarih	2013
Örnek Metin	The principle of induction cooker is based on heating the metallic pan with circulating eddy currents induced by high frequency AC magnetic field. The coil within the induction cooker and the load (pan / pot) acts as a transformer if the load has an electrically conducting base. If the conducting base is ferromagnetic, then the power is transferred with high efficiency. In this document, the quasi resonant topology for induction heating is analyzed. Moreover, pan detection and the method to determine the amount of power delivered to the pan is covered. Jitter method and the three basic benefits of using jitter method during switching action is pointed out. An experimental prototype with a power rating of 2300W is constructed to test the validity of the proposed methods and control algorithms. It was observed that the quasi resonant topology is advantageous over half bridge topology when jitter method is used to drive the semiconductor switches. The test results of the prototype reveal that the current harmonics drawn from the utility is within the limits of the standard EN 61000-3-2.
DOI	10.1109/EEEIC.2013.6549590

Kaynağa git Özyeğin Üniversitesi

Aramaya Dön

Özyeğin Üniversitesi

Kaynağa git

Induction cooker design with quasi resonant topology using jitter drive method

Yazar Tulu, M. E., Yildirim, D.

Basım Tarihi 2013

Basım Yeri - IEEE

Konu Induction cooker, Ferromagnetic, Eddy current, Jitter method, Quasi resonant

Tür Belge

Dil İngilizce

Dijital Evet

Yazma Hayır

Kütüphane Özyeğin Üniversitesi

Kayıt Numarası 507e2fdc-38af-4073-bad0-4bb0a0e5f7cb

Tarih 2013

Örnek Metin The principle of induction cooker is based on heating the metallic pan with circulating eddy currents induced by high frequency AC magnetic field. The coil within the induction cooker and the load (pan / pot) acts as a transformer if the load has an electrically conducting base. If the conducting base is ferromagnetic, then the power is transferred with high efficiency. In this document, the quasi resonant topology for induction heating is analyzed. Moreover, pan detection and the method to determine the amount of power delivered to the pan is covered. Jitter method and the three basic benefits of using jitter method during switching action is pointed out. An experimental prototype with a power rating of 2300W is constructed to test the validity of the proposed methods and control algorithms. It was observed that the quasi resonant topology is advantageous over half bridge topology when jitter method is used to drive the semiconductor switches. The test results of the prototype reveal that the current harmonics drawn from the utility is within the limits of the standard EN 61000-3-2.

DOI 10.1109/EEEIC.2013.6549590