Evaluation of infection resistance of biological implants through CMP based micro-patterning

Name: Evaluation of infection resistance of biological implants through CMP based micro-patterning
Author: Başım, Gül Bahar, Özdemir, Zeynep, Karagöz, Ayşe

İsim	Evaluation of infection resistance of biological implants through CMP based micro-patterning
Yazar	Başım, Gül Bahar, Özdemir, Zeynep, Karagöz, Ayşe
Basım Tarihi:	2012-01
Basım Yeri	- Cambridge University Press
Konu	CMP, Biomaterial, Microstructure
Tür	Belge
Dil	İngilizce
Dijital	Evet
Yazma	Hayır
Kütüphane:	Özyeğin Üniversitesi
Demirbaş Numarası	2-s2.0-84879520289
Kayıt Numarası	264f76e9-59e3-4610-b016-363fbac1a73f
Lokasyon	Mechanical Engineering
Tarih	2012-01
Notlar	Due to copyright restrictions, the access to the full text of this article is only available via subscription.
Örnek Metin	Biomaterials are widely used for dental implants, orthopedic devices, cardiac pacemakers and catheters. One of the main concerns on using bio-implants is the risk of infection on the materials used. In this study, our aim is to quantify the effect of controlled surface roughness on the infection resistance of the titanium based bio-materials which are commonly used for orthopedic devices and dental implants. To modify the surface roughness of the surfaces in a controlled manner, Chemical Mechanical Polishing (CMP) technique, which is extensively used in semiconductor industry for the planarization of the interlayer dielectrics and metals, is utilized. To determine the infection resistance of the created films with varying surface roughness, bacteria growth response was studied on titanium plates after CMP.
DOI	10.1557/opl.2012.1469
Cilt	1464

Kaynağa git Özyeğin Üniversitesi

Aramaya Dön

Özyeğin Üniversitesi

Kaynağa git

Evaluation of infection resistance of biological implants through CMP based micro-patterning

Yazar Başım, Gül Bahar, Özdemir, Zeynep, Karagöz, Ayşe

Basım Tarihi 2012-01

Basım Yeri - Cambridge University Press

Konu CMP, Biomaterial, Microstructure

Tür Belge

Dil İngilizce

Dijital Evet

Yazma Hayır

Kütüphane Özyeğin Üniversitesi

Demirbaş Numarası 2-s2.0-84879520289

Kayıt Numarası 264f76e9-59e3-4610-b016-363fbac1a73f

Lokasyon Mechanical Engineering

Tarih 2012-01

Notlar Due to copyright restrictions, the access to the full text of this article is only available via subscription.

Örnek Metin Biomaterials are widely used for dental implants, orthopedic devices, cardiac pacemakers and catheters. One of the main concerns on using bio-implants is the risk of infection on the materials used. In this study, our aim is to quantify the effect of controlled surface roughness on the infection resistance of the titanium based bio-materials which are commonly used for orthopedic devices and dental implants. To modify the surface roughness of the surfaces in a controlled manner, Chemical Mechanical Polishing (CMP) technique, which is extensively used in semiconductor industry for the planarization of the interlayer dielectrics and metals, is utilized. To determine the infection resistance of the created films with varying surface roughness, bacteria growth response was studied on titanium plates after CMP.

DOI 10.1557/opl.2012.1469

Cilt 1464