Fabrication and mechanical characterization of polypropylene clay nanocomposites

Name: Fabrication and mechanical characterization of polypropylene clay nanocomposites
Author: Zakaria, A. Z., Salahi, Salar, Yapıcı, Güney Güven

İsim	Fabrication and mechanical characterization of polypropylene clay nanocomposites
Yazar	Zakaria, A. Z., Salahi, Salar, Yapıcı, Güney Güven
Basım Tarihi:	2021
Basım Yeri	- Trans Tech Publications Ltd
Konu	Exfoliation, Extrusion, Mechanical behavior, Nanoclay, Nanocomposites, Strain rate
Tür	Belge
Dil	İngilizce
Dijital	Evet
Yazma	Hayır
Kütüphane:	Özyeğin Üniversitesi
Demirbaş Numarası	978-303573835-3
Kayıt Numarası	ea2df2a7-c7c1-422b-926b-bedc37749dd8
Lokasyon	Mechanical Engineering
Tarih	2021
Örnek Metin	Investigating the influence of process parameters is vital to enhance the mechanical properties of nanoparticle reinforced polymer composites. Nanocomposites of polypropylene/nanoclay are prepared by the extrusion method. To characterize the mechanical response of nanocomposites over different compounding ratios, samples are prepared with 5 and 10 wt%. Effects of re-extrusion and (PP-g-MA) compatibilizer on the tensile performance of nanocomposites were evaluated at different strain rates. X-ray diffraction evaluation of compounds indicated that re-extrusion is an important factor in increasing the exfoliation degree. Results show that improvement in the exfoliation degree enhances the tensile modulus, without significant influence on the tensile strength.
DOI	10.4028/www.scientific.net/KEM.882.107
Cilt	882 KEM

Kaynağa git Özyeğin Üniversitesi

Aramaya Dön

Özyeğin Üniversitesi

Kaynağa git

Fabrication and mechanical characterization of polypropylene clay nanocomposites

Yazar Zakaria, A. Z., Salahi, Salar, Yapıcı, Güney Güven

Basım Tarihi 2021

Basım Yeri - Trans Tech Publications Ltd

Konu Exfoliation, Extrusion, Mechanical behavior, Nanoclay, Nanocomposites, Strain rate

Tür Belge

Dil İngilizce

Dijital Evet

Yazma Hayır

Kütüphane Özyeğin Üniversitesi

Demirbaş Numarası 978-303573835-3

Kayıt Numarası ea2df2a7-c7c1-422b-926b-bedc37749dd8

Lokasyon Mechanical Engineering

Tarih 2021

Örnek Metin Investigating the influence of process parameters is vital to enhance the mechanical properties of nanoparticle reinforced polymer composites. Nanocomposites of polypropylene/nanoclay are prepared by the extrusion method. To characterize the mechanical response of nanocomposites over different compounding ratios, samples are prepared with 5 and 10 wt%. Effects of re-extrusion and (PP-g-MA) compatibilizer on the tensile performance of nanocomposites were evaluated at different strain rates. X-ray diffraction evaluation of compounds indicated that re-extrusion is an important factor in increasing the exfoliation degree. Results show that improvement in the exfoliation degree enhances the tensile modulus, without significant influence on the tensile strength.

DOI 10.4028/www.scientific.net/KEM.882.107

Cilt 882 KEM